[BHM-1] Ground operations

Total Time: 2.0

Ground Briefing: 0.5 

Flight 1.05

Mission Objectives: Introduce normal operations and checklist procedures

MissionTraining Tasks:

Ground Training:

1. BeforeBriefing Starting(30 Enginesminutes)
   • Overview of ground operation procedures and objectives.
   • StartingReview Enginesof aircraft systems and controls relevant to ground operations.
   • BeforeDiscuss Taxipre-flight checks, including fuel, weight and balance, and systems checks.
   • BeforeEmphasize Takeoffsafety protocols, including avoiding rotor wash and maintaining situational awareness around the aircraft.
   • BeforeReview Landingtaxiing procedures, including communication with ground control and crew coordination.

Flight Training:

2. Flight Objectives (90 minutes)
   • Conduct pre-flight checks on the aircraft, ensuring all systems are operational.
   • AfterExecute Landingthe following ground operations:
     • Taxi Procedures:
       • Taxi the aircraft following designated routes safely and efficiently, maintaining awareness of surroundings.
       • EngineCommunicate Shutdowneffectively with ground control for taxi instructions and clearances.
       • AircraftDemonstrate Cockingproper use of brakes, rotor engagement timing, and smooth transitions during taxiing.
     • AircraftWarm-up UncockingOperations:
       • Practice engine systems check while on the ground, and monitor system indications.
       • ScrambleConduct an engine run-up as part of pre-flight checks.
     • Takeoff Preparation:
       • Complete final checks before takeoff, ensuring readiness for flight.
       • Execute final crew briefings, discussing roles for takeoff and initial climb procedures.
     • Perform takeoff and transition into flight operations, applying knowledge from ground procedures.

Post-Flight Training:

3. Debriefing (30 minutes)
   • Review the execution of ground operations against established objectives.
   • Discuss performance during taxiing, including any challenges faced or safety considerations.
   • Evaluate communication proficiency with ground control and crew during ground operations.
   • Provide feedback on adherence to safety protocols and overall situational awareness.

Special Instructions: GROUND TRAINING ONLY FOR UPT-H PILOTS.

Should a proper H-60 Module be made, UPT-H pilots may be allowed to perform checklist procedures while a qualified IP flies.